Next Generation Copper Patchcords Cat 5e Shielded Copper Patchcord - Orange
-

CAT5e 350-MHz Patch Cable with Snagless Boots, 24 AWG, Straight-Pinning, Custom Lengths
OPF Sheilded Category 5e Patch Cords enable you to
get the optimum performance from your
cabling system. Our factory made and tested
Patch Cords offer you guaranteed quality All Patch Cords are supplied with boots and ID tag.



- Category 5e Shielded Series
Cat 5e Copper Patchcord - t568a wiring
- Application:Suitable to be used in 100-Mbps networking
Cable Type — PVC: 4-pair stranded STP
Operating Temperature: -20 to +70°C
Frequency : up to 300mhz
Pin Type: Straightpinned or Crossover Cable
Cable Outer Sheath:CMR Riser
Conductor / Gauge :Annealed copper stranded wire / 24 AWG
Wiring Type :TIA/EIA-568A
Connectors :RJ-45 8/8 protection cover
Operating Voltage ≤ 125 Vdc 125 Vdc
DC Loop Resistance ≤ 190 Ω/km 140 Ω/km
Mutual Capacity ≤ 50 nF/km 48 nF/km
Capacitance Unbalance ≤ 1600 pF/km 1600 pF/km
Input Impedance 100±15 Ω
NVP @ 100 MHz 0,7 c nominal 0,7 c nominal
ACR > 10 dB @ 125 MHz 40 dB @ 250 MH
Characterstics:
Molded, snag-free boots prevent cable kinks and bent pins when removing them from patch panels. And they reduce crosstalk. Patch Cables are all of stranded wire type, supported by OFNR jacket construction to protect the RJ-45 connectors and increase Patch cable life cycle, booth/covers are inserted at each end.




- Category 5e Shielded Series
Cat 5e Copper Patchcord - t568b wiring
- Application:Suitable to be used in 100-Mbps networking
Cable Type — PVC: 4-pair stranded STP
Operating Temperature: -20 to +70°C
Frequency : up to 300mhz
Pin Type: Straightpinned or Crossover Cable
Cable Outer Sheath:CMR Riser
Conductor / Gauge :Annealed copper stranded wire / 24 AWG
Wiring Type :TIA/EIA-568B
Connectors :RJ-45 8/8 protection cover
Operating Voltage ≤ 125 Vdc 125 Vdc
DC Loop Resistance ≤ 190 Ω/km 140 Ω/km
Mutual Capacity ≤ 50 nF/km 48 nF/km
Capacitance Unbalance ≤ 1600 pF/km 1600 pF/km
Input Impedance 100±15 Ω
NVP @ 100 MHz 0,7 c nominal 0,7 c nominal
ACR > 10 dB @ 125 MHz 40 dB @ 250 MH
Characterstics:
Molded, snag-free boots prevent cable kinks and bent pins when removing them from patch panels. And they reduce crosstalk. Patch Cables are all of stranded wire type, supported by OFNR jacket construction to protect the RJ-45 connectors and increase Patch cable life cycle, booth/covers are inserted at each end.




- Category 5e Shielded Series
Cat 5e Copper Patchcord - USOC wiring
- Application:Suitable to be used in 100-Mbps networking
Cable Type — PVC: 4-pair stranded STP
Operating Temperature: -20 to +70°C
Frequency : up to 300mhz
Pin Type: Straightpinned or Crossover Cable
Cable Outer Sheath:CMR Riser
Conductor / Gauge :Annealed copper stranded wire / 24 AWG
Wiring Type :TIA/EIA-USOC
Connectors :RJ-45 8/8 protection cover
Operating Voltage ≤ 125 Vdc 125 Vdc
DC Loop Resistance ≤ 190 Ω/km 140 Ω/km
Mutual Capacity ≤ 50 nF/km 48 nF/km
Capacitance Unbalance ≤ 1600 pF/km 1600 pF/km
Input Impedance 100±15 Ω
NVP @ 100 MHz 0,7 c nominal 0,7 c nominal
ACR > 10 dB @ 125 MHz 40 dB @ 250 MH
Characterstics:
Molded, snag-free boots prevent cable kinks and bent pins when removing them from patch panels. And they reduce crosstalk. Patch Cables are all of stranded wire type, supported by OFNR jacket construction to protect the RJ-45 connectors and increase Patch cable life cycle, booth/covers are inserted at each end.

- Category 5e Copper Sheilded Patchcord
Category 5e CMR | STP
-